Series 200 & 300 Expansion Joint:
 Expansion joints should be installed in each straight run of conveyor that passes through an oven. The expansion joint should be located on the center line of the oven expansion joint. |
| |
Series 200 & 300 Cross Bar Carriers - Single and Double:
 Where loads exceed the capacity of a single chain pendant, "cross bar carriers" are used to distribute the weight over two or more pendants. |
| |
Series 200 & 300 Track Inspection Section:
 The track inspection section allows for inspection of the chain via a removable side cover. In addition, this component is utilized to load the chain into the system. One inspection section is recommended for every 250 linear feet of conveyor, and at least one is required for each system. |
